A&K Construction is rated as #1 EIFS Repair Company in Chicago Area. Simply forward your inspection report provided by a certified inspector or contact us to help you get the inspection.

Installation of a drained and back-ventilated Aluminum Composite Material (ACM) rainscreen system with joint spline attachment system, custom fabricated and engineered to accommodate architectural design requirements. System to include sub-framing, attachment clips, air space for drainage and ventilation, and panel fabrication to achieve precise alignment and aesthetic consistency.

All work to be performed in accordance with manufacturer specifications and approved shop drawings.

Sealant is used to "seal" the joint that exists between two dissimilar materials; those
dissimilar surfaces expand and contract from thermal change and building movement. The
sealant must accommodate that movement. This activity wears out the sealant at a rate
that can be more rapid than the wear on other façade components. Sealant addresses this
condition of moving joints in building envelopes and, as a result, must be maintained and
replaced per the manufacturers' recommendations (typically within 10-20 years of
installation). The process of sealant replacement, therefore, could take place many times
over a building's useful life.

"Overcladding" offers an existing building owner the option to use many new textures and
specialty finishes that Dryvit did not offer years ago. The "overclad" application of new
finishes can allow for an existing building to be reborn through redesign, reimaging and/or
rebranding. This opportunity can be further enhanced through the addition of sculptural
EIFS based shapes such as add-on trims, bands, cornice, quoins, etc. and/or the addition
of aesthetic grooves being cut into the existing EIFS cladding.

Chimney crown replacement, chimney cover fabrication and installation, diverter flashing, tuckpointing, and moisture intrusion repairs.

Holes or other damage to the Dryvit Systems Inc. EIFS system can be properly repaired by A&K Construction Renovation Inc. following manufacturer-approved repair procedures to restore structural integrity and finish appearance.

Cement board stucco is a high impact, moisture resistant exterior wall finish system incorporating a cement board substrate, air and moisture barrier, reinforced base coat and a polymer based finish.

Stone veneer is a thin layer of any stone used as decorative facing material that is not meant to be load bearing. Stone cladding is a stone veneer, or simulated stone, applied to a building or other structure made of a material other than stone.

Traditional and synthetic stucco installation, resurfacing, crack repair, and complete façade refinishing for residential and commercial properties.

Cleaning EIFS should be done by a skilled
professional. The best way to clean EIFS is to
use high water volume coupled with low water
pressure and non-abrasive cleaners. Do not
use caustic chemicals or abrasive cleaning
techniques, which will permanently damage
the finish.

Weatherlastic Smooth is a water-based elastomeric
wall coating. It is easily applied with an airless spray or roller. Weatherlastic Smooth is based upon a 100% acrylic, copolymer elastomeric resin, which provides excellent elongation and flexibility at low temperatures. The coating resists mildew growth and dirt pickup and is highly chalk-resistant.

​

Weatherlastic Smooth is recommended as a waterproofcoating on properly prepared concrete, masonry, EIFSand stucco substrates.

​

Hardie Board siding is a super durable siding product that looks amazing, is long-lasting, and comes with a fabulous warranty. It's made of cement, sand, and cellulose fibers which combine to create an outstanding material to both protect and beautify homes.

We can replace your old damaged window with new Pella, Andersen, Marvin, windows.

A 2-Pass Base Coat Which Improves Impact Resistance and Provides Protection from Woodpecker Damage for EIFS Substrates.